|
A. Overfill Monitor CALIBRATION ASSEMBLY: Inner and outer plastic housings with printed calibration paper between housings. (options - glass inner piece)
B. Overfill Monitor INDICATOR TUBE: Red HDPE plastic
C. Overfill Monitor LOCK NUT: Red plastic to hold calibration assembly in place. (options - aluminum lock nut)
D. DURO NITRILE GASKET: On which flanges on base of calibration assembly are firmly seated to prevent leakage. (options - viton gasket)
E. Overfill Monitor ALUMINUM DIE CAST BUSHING: Type O-1.5 fits 1.5” standard npt tank flange. Type O-2 fits standard 2” npt tank flange.
F. Overfill Monitor FLOAT ARM ASSEMBLY: 1/8” aluminum rod attached to float and indicator.
G. Overfill Monitor PLASTIC FLOAT: High density polyethelene float 1.125” dia. x 3.0” long. (options - stainless float, nitrophyll float, 3/4” float)
Overfill Prevention Gauges are manufactured to fit specific overfill level monitor needs from 6” to 30”. Float Rod is varied in length to accommodate and monitor different depths. You specify the length at which you want the overfill prevention gauge to show alarm.
Ordering Information: Part numbers are as follows O-(opening)-(Depth). Example—O-2-6”.
Available Options: Overfill Alarm - Gauge Guard
|
){kind=link}
){kind=link}